English

Umshini Wokudonsa KaMagnet Ovumelanayo Ongena Gearless THY-TM-K300

Umshini Waphakade Wezibuthe Ovumelanisiwe Wokudonsa Okungenantambo THY-TM-K300 Isithombe Esifakiwe
  • Umshini Wokudonsa KaMagnet Ovumelanayo Ongena Gearless THY-TM-K300

Incazelo emfushane:

Amandla kagesi: 380V

Ukugoqa: 2:1/4:1

Ibhuleki:DC110V 2×1.6A

Isisindo: 520kg

I-Max.Static Load:6000kg


Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Amapharamitha womkhiqizo

1
Amandla kagesi 380V
Ukugoqa 2:1/4:1
Ibhuleki I-DC110V 2×1.6A
Isisindo 520kg
I-Max.Static Load 6000kg
561

Izinzuzo Zethu

1.Ukulethwa Okusheshayo

2.I-transaction iyisiqalo nje, isevisi ayipheli

3.Uhlobo:Umshini Wokudonsa THY-TM-K300

4.Singakwazi ukuhlinzeka ngemishini yokudonsa ehambisanayo ne-asynchronous ye-TORINDRIVE, MONADRIVE, MONTANARI, FAXI, SYLG nezinye izinhlobo.

5.Ukuthembana kuyinjabulo! Angisoze ngahluleka ukuthembela kwakho!

1

Idizayini nokukhiqizwa komshini wokudonsa unomphela ozibuthe we-THY-TM-K300 ozibuthe ovumelanayo we-elevator ongenawo amandla kuhambisana ne- "GB7588-2003-Safety Code for Elevator Production and Installation", "EN81-1: 1998-Imithetho Yokuphepha Yokwakhiwa Nokufakwa Kwesikheshi", "204 Imithethonqubo ye-Trection-E8 efanelekile ku-TGB). Ukwakhiwa komshini wokudonsa kuhlangabezane nezidingo zokusebenza Ngemva kwesikhathi sokusebenza (unyaka ongu-1 noma njengoba kudingeka), amafutha adinga ukungezwa, futhi asikho isidingo sokwengeza noma ukufaka esikhundleni samafutha ama-bearings avaliwe, sicela ulandele izidingo zomjovo ngale ndlela elandelayo:Sicela ujove i-Mobil Grease XHP222 (NLGI idethi ye-201injini enkulu ye-201) (i-V220C 2 grade) yenjini eyinhloko enedethi yokukhiqiza ngemuva kuka-2018. Ifanele ikheshi elinegumbi lomshini kanye nekheshi elingenalo igumbi lomshini Isilinganiso sokudonsa singu-2:1 no-4:1, umthwalo olinganiselwe ngu-1250KG～1600KG, isivinini esilinganiselwe singu-0.5～000mm, i-2. 450mm kanye 480mm Ifanele indawo yokusebenza yangaphakathi.

Ukulungiswa kwegebe lamabhuleki

•Lungisa igebe lamabhuleki (ibanga eliphakathi kwepuleti elimile kanye nepuleti eligudlukayo), igebe lamabhuleki lingaphansi kuka-0.1mm uma libanjiwe, futhi licishe libe ngu-0.25~0.4mm uma likhishwa.

• Sebenzisa igeji ye- feeler gauge engu-0.3 ukuze uhlole igebe lomoya lekhona lebhuleki: uma igebe lomoya lingaphansi kuka-0.3mm, khulula ibhawudi elikhwezayo kulelikhona ngokuphambene newashi, bese uphendulela ibhawudi elingenalutho ngokwewashi nge-engeli encane, bese uqinisa ibhawudi elikhwezayo.

4

• Sebenzisa igeji ye- feeler gauge engu-0.35mm ukuze uhlole igebe lomoya eliyi-angular: uma igebe lomoya likhulu kuno-0.35mm, khulula ibhawudo ekhona ngokuphambene newashi, bese uphendulela ibhawudi elingenalutho ngokuphambene newashi nge-engeli encane, bese uqinisa ibhawudi elikhwezayo.

5

• Lungisa igebe lawo wonke amakhona ebhuleki ukuze uqinisekise ukuthi igeji ye- feeler gauge engu-0.3mm iyakwazi ukudlula, kanye ne-0.35mm ye-feeller gauge ayikwazi ukudlula.

Ukulungiswa kwe-brake stroke

•Uma ibhuleki libanjiwe, sebenzisa i-feelleer gauge engu-0.08mm ukuze uhlole ukuphuma kwesondo phakathi kwebhuleki nebhuleki pad. Uma imvume ingaphansi kuka-0.08mm, phinda indlela yokulungisa yokuphuma kwamabhuleki, bese ushuna kahle ukuze uqinisekise ukuthi ukuphuma kwesondo kungu-≥0.08mm.

Ukulungiswa kwe-micro switch

• Khipha ikhava engaphezulu yebhuleki futhi ulungise i-micro switch adjustment block ukuze kuthi lapho ibhuleki livulwa/livalwa, i-micro switch ingavulwa/ivalwe ngendlela enokwethenjelwa, futhi ikhava isethwe kabusha ngemva kokulungiswa.

Izinyathelo zokususa isifaki khodi

6

a. Sebenzisa ukhiye we-3mm Allen ukuze ususe ikhava yangemuva engangenisi uthuli yesishumeki.

b. Khulula isikulufu sokunweba seringi yangaphandle yesifaki khodi ngokhiye ongu-2mm Allen.

c. Khulula isikulufu se-M5 (ukujika okungu-2~4) ukuze uqinise isifaki khodi ngokhiye ongu-4mm Allen.

d. Sebenzisa ukhiye we-8mm Allen ukuze ugoqe isikulufu se-M10 ukuze uphushe isishumeki.

e. Bamba isishumeki ngesandla sakho usikhiphe kahle usibeke endaweni ephephile.

Izinyathelo zokufaka isifaki khodi

7

a. Sebenzisa ukhiye we-3mm Allen ukuze ususe ikhava yangemuva engangenisi uthuli yesishumeki.

b. Qinisa isikulufa sokufaka ikhodi esingu-M5 (amandla okuqinisa 5+0.5Nm) ngokhiye ongu-4mm Allen.

c. Sebenzisa ukhiye ongu-2mm Allen ukuze uqinise isikulufu sokunweba seringi yangaphandle yesifaki khodi (amandla okukhiya angu-1.25-0.2Nm).

d. Sebenzisa ukhiye ongu-3mm Allen ukuze uqinise ikhava yangemuva engangenisi uthuli yesishumeki (amandla okukhiya 5+0.5Nm).

  • Okwedlule:
  • Olandelayo:

    • Thumela umlayezo wakho kithi:

    Izigaba zemikhiqizo

    Thumela umlayezo wakho kithi:

    Bhala umyalezo wakho lapha futhi usithumelele wona
    Chofoza u-enter ukuze useshe noma u-ESC ukuze uvale